3D Scanning Services and Equipment

CT-Mini ProCon CT Scanner

CT-Mini ProCon CT Scanner

CT-MINI, - the Original- , with minimal space requirement, inspecting plastics, ceramics, and metals. This 3D-CT, from ProCon X-Ray GmbH “performs as laboratory micro CT by excellent CT results in real-time”, comment of Norman Schott, our Applications Specialist.

The room-saving CT-MINI can be equipped with micro-focus X-ray tubes from 90 kV up to 130 kV, depending on specific customer requirements. The focus-detector distance can be adjusted to optimize the contrast. A range of flat panel detectors is available, to adapt customer´s requirement. A sliding door opens wide in order to easily mount the specimen up to 200 mm onto the rotation table. The horizontal oriented X-ray beam helps to avoid gravity effects during scanning.

The CT-MINI system is ideal for nondestructive testing (NDT), materials analysis, rapid prototyping, and because of its fast on-line reconstruction capable for a production guided process control.


  Standard Advanced
X-ray voltage 90 kV 130 kV
Detector 50 μm, 1 K2 100 μm, 1 K2
Specimen 35 mm, 5 kg 70 mm, 20 kg
Axes 2 2
Reconstruction 1 K3, real-time 1 K3, real-time;
8 K3, off-line
Smallest 3D detail 5 μm 5 μm
System weight 500 kg 500 kg


  • Industrial X-ray Computed Tomography (CT)
  • 3D volume CT
  • Non-destructive testing (NDT) – 2D and 3D
  • Quality control independent of material
  • Defect recognition (voids, cracks, …)
  • Contactless metrology
  • CT reconstruction in real-time
  • Easy operation
  • Radiation safety better than 1 μSv/h
  • Desktop system

Exact Metrology Inc. sells, services and supports the products promoted on this website. Many or most are copyrighted, registered or trademarked to their respective manufacturers who have granted Exact Metrology Inc. license to represent.