Leica T-Probe

Wireless Device for Probing Hard-to-Reach Points

Leica T-Probe, the “Walk-Around” armless wireless device for probing of hidden, hard-to-reach points and measuring of up to 9 cars in one setup with minimal setup times, sets new standards by increasing accuracy, offering a ten-fold increase in point acquisition rate and providing user-assignable multi-function buttons.

Leica T-Probe

Features of Leica T-Probe

Small, light, user-friendly, and more accurate than any other hand-held probe in the world, the Leica T-Probe gives you more than 6 Degrees of Freedom: It gives you the right way to measure. Now featuring longer styli, Leica T-Probe reaches up to 30 m (98 ft) in any dimension.

How Does the Leica T-Probe Work?

Leica T-Probes function by combining the tracking of a retroreflector with the monitoring of a known pattern of infrared diodes on the probe. When probing a point, the laser tracker calculates the X, Y and Z position of the probe, while a camera calculates the probe’s rotation values of RX, RY and RZ. These combined calculations provide 6DoF (Six Degrees of Freedom) data – an advancement over traditional 3D measurements.

  • PowerLock: For the first time in the history of laser trackers, the laser beam moves to the user, not the other way around.
  • Smaller, lighter and more convenient than comparable solutions
  • Largest armless operation measurement volume of up to 30 m (98 ft), reducing inspections by min. 50%
  • Wider acceptance angle than any comparable system: pitch ±45°, yaw ±45°, roll 360°
  • Battery-powered for wireless operation and increased productivity
  • Extended battery life with flexible “sleep” mode
  • Automated probe identification reduces operator errors
  • User-assignable multi-function buttons for individual application functionality for all buttons
  • One-hand operation with left/right-hand functionality
  • Renishaw-compatible with a wide range of styli available, incl. 100 mm, 200 mm and longer
  • Visual feedback for battery, in-view and in-distance status and for process information
  • Acoustic process information feedback
  • Insensitive to environmental light
  • Point rate output of 1,000 points per second
  • Tracking speed > 1 m/s
  • Measurement uncertainty of 3D Point (MPE): U3d = 100 µm if under 7 m (0.004” if under 23 ft), U3d = 30 µm + 10 µm/m if greater than 7 m (0.0012” + 0.00012”/ft if greater than 23 ft)
  • Measurement uncertainty of spatial length (MPE): Ul = ± 60 µm if under 8.5 m (± 0.0024” if under 27.9 ft), Ul = ± 7 µm/m if greater than 8.5 m (± 0.00008”/ft if greater than 27.9 ft)
  • Measurement uncertainty of sphere radius (MPE): Ur = ± 20 µm + 2 µm/m (± 0.0008” + 0.00002”/ft)
  • Precise quick release and automated stylus recognition for exchanging styli without calibration
Compatible Laser Tracker For

 

T-Probe: AT960

 

Hexagon (Leica) Absolute Tracker AT960 is an all-in-one laser tracker that fits in a single flight case. Offering high-speed dynamic measurement as standard, it is a complete solution for six degrees of freedom (6DoF) probing, scanning and automated inspection as well as reflector measurement.

Hexagon (Leica) AT960 Absolute Laser Tracker

Compatible Laser Tracker For
T-Probe: AT960

Hexagon (Leica) Absolute Tracker AT960 is an all-in-one laser tracker that fits in a single flight case. Offering high-speed dynamic measurement as standard, it is a complete solution for six degrees of freedom (6DoF) probing, scanning and automated inspection as well as reflector measurement.

Hexagon (Leica) AT960 Absolute Laser Tracker